Requirements and national regulations on cosmetic packaging materials
Release time:
2023-03-21
In fact, all materials of cosmetic packaging should be non-toxic and safe, and we explain it from six aspects.
In fact, all materials of cosmetic packaging should be non-toxic and safe, and we explain it from six aspects.
1. Bottles (including plastic bottles and glass bottles)
1.1 The bottle body is complete, stable, straight, smooth, and the thickness is basically uniform. There are no cold bursts, cracks, visible scars and deformations.
1.2 The bottle mouth should be straight and burr-free. Mating structures, such as threads, should be in good condition and upright.
1.3 The inside and outside of the bottle are clean.
1.4 The bottle and cap fit tightly, there are no sliding teeth, loosening and leakage.
2. Bags (including paper bags, plastic bags and composite bags)
2.1 There should be no wrinkles, scratches and bubbles, and the color should be consistent with the standard sample.
2.2 The seal should be firm and erect, and there should be no openings, holes, paste (liquid) leakage and other phenomena.
2.3 The composite bag is firmly compounded and the coating is uniform.
3. Hose
3.1 The tube body is smooth, neat, uniform in thickness, without obvious scratches, and the color is consistent with the standard sample.
3.2 The seal should be firm and must not be opened or folded.
3.3 The cover plate should meet the requirements.
4. Boxes (including paper boxes, plastic boxes and iron boxes)
The surface of the 4.1 sub is smooth and erect, without noticeable scratches and burrs. The color is uniform and consistent with the standard sample.
4.2 The opening is suitable and meets the test requirements.
4.3 The mirror and contents inside the box are firmly glued to the box and mirrored well. No scratches or damage.
5. Spray cans
5.1 The tank body is flat, no rust, smooth weld, no obvious scratches in the main parts, uniform color, and standard samples.
5.2 The roller mouth should be smooth and free of cracks and deformation.
5.3 The cover plate should meet the requirements.
5.4 The pump spray box should meet the relevant requirements.
6. Ingot tube
6.1 The end of the tube should be smooth and even.
6.2 The tube body is suitable for air tightness, and the paste should be spun out or pushed out normally.
Mobile Phone Client
WeChat QR Code
Shantou Xingying Plastic Products Co., Ltd.
Address: No.20, No.32, Maxi Middle Road, Weidi Road, jinping district, Shantou City
Mobile:8613902749955
Tel:86-754-82489236
Email:shantouxinda@163.com
Micro signal: 8613902749955
QQ: 1127970972
Copyright©Shantou Xingying Plastic Products Co., Ltd. SEO